Tires/Tubes

Case of 50 700c tubes. 105g per tube. Available with 42mm and 60mm valve lengths.

When bite and traction are required above all else, the Gnarwhal keeps you moving. Roll through the roughest terrain and deepest snow with the stud-ready aggressively treaded Gnarwhal. Key features - Excels in snow, ice, and slippery terrain - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Inner Strength casing is lightweight sidewall protection that's supple and strong - Studdable design allows for added traction in icy conditions - Easy install of available Bontrager Tire Studs with Bontrager Tire Stud Tool

Riding your fatbike on ice just got even better with the redesigned Dillinger tread pattern and tubeless compatibility. 240 carefully positioned studs allow you to rail icy off-camber singletrack with confidence and control, while taller side lugs bring improved cornering in snowy conditions. Dillinger’s center tread is tightly spaced for speed when you need it so you can power up an icy climb and rip down the other side as the studs claw into the slick surface.

PROCORE is an inner high-pressure air chamber for tubeless systems that allows dual air pressures for traction and impact protection. Procore allows low pressures (down to 14psi) to be run in tubeless tires, with a high-pressure inner chamber that locks the bead in place and prevents burping and rim dents from impacts. - Sold as a set with all components to set up a wheelset on one bike (tires not included) - Minimum internal rim width is 23mm - Maximum distance from rim well to rim inner surface is 20mm - Minimum tire pressure with ProCore is 14psi

PROCORE is an inner high-pressure air chamber for tubeless systems that allows dual air pressures for traction and impact protection. Procore allows low pressures (down to 14psi) to be run in tubeless tires, with a high-pressure inner chamber that locks the bead in place and prevents burping and rim dents from impacts. - Sold as a set with all components to set up a wheelset on one bike (tires not included) - Minimum internal rim width is 23mm - Maximum distance from rim well to rim inner surface is 20mm - Minimum tire pressure with ProCore is 14 psi

PROCORE is an inner high-pressure air chamber for tubeless systems that allows dual air pressures for traction and impact protection. Procore allows low pressures (down to 14psi) to be run in tubeless tires, with a high-pressure inner chamber that locks the bead in place and prevents burping and rim dents from impacts. - Sold as a set with all components to set up a wheelset on one bike (tires not included) - Minimum internal rim width is 23mm - Maximum distance from rim well to rim inner surface is 20mm - Minimum tire pressure with ProCore is 14 psi

- Studded tire for added traction when conditions get icy - Weight optimized 120tpi casing, Silica rubber, max tire pressure 20psi - Tubeless ready bead/casing

Challenge's Grifo 33 Seta Extra Tubular boasts a tread that excels in snow, mud, grass and firm dirt. It's also built on their light and supple 260tpi hand-made silk casing for an awesome ride quality. Plus, there's an anti-puncture strip under the tread and polyester in the sidewalls for extra durability. You also get a latex tube. Latex tubes are lighter, thinner and more flexible than butyl tubes, increasing your comfort, lowering rolling resistance, and helping to prevent flats, too.

The ‘turbo’ of spike tires. With 361 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The scales stop at 695 g, yet the tire remains agile and sporty. - LiteSkin: The lightest option. LiteSkin MTB tires forego SnakeSkin, but still have high pressure resistant tire beads. If you don't mind the extra effort, these tires can also be converted to Tubeless by using a liquid sealant. - Special Winter compound - Folding Bead

The ‘turbo’ of spike tires. With 361 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The scales stop at 695 g, yet the tire remains agile and sporty. - LiteSkin: The lightest option. LiteSkin MTB tires forego SnakeSkin, but still have high pressure resistant tire beads. If you don't mind the extra effort, these tires can also be converted to Tubeless by using a liquid sealant. - Winter compound - Folding bead

Track professionals have placed their trust in Continental's Special Class II for generations because it's such a fast, great-handling and reliable tire. With its finely wound cotton casing, it provides awesome durability and a compliant, comfortable ride, even at high inflation pressures (the Special Class can take up to 160 to 170 psi). Plus, the carbon-black tread compound provides long wear and top-notch traction and cornering adhesion on virtually any velodrome surface. Get the winning edge with the Special Class II!

At a mere 1375g, the Dillinger virtually launches you over the steepest and snowiest climbs. When you need to roll fast, tightly spaced center treads do not let Dillinger’s unparalleled traction get in the way.

Flotation meets speed with the 4.8 Husker Du fatbike tire. Built around the perfect balance of low rolling resistance and traction, shorter center treads roll faster and slightly taller shoulder knobs give more bite when cornering. The large casing and reduced lug count combined with the tubeless-ready bead makes the 4.8 Husker Du the perfect tire for deep, fast pursuits.

Continental's Grand Prix 4000 S Tubular is destined for greatness. The seamless casing makes it easy to glue the tire to the rim, and this race-worthy tire has all the suppleness and incredible road feel you expect from a handmade German tubular. This sew-up also boasts Continental's Black Chili compound and Vectran Breaker Belt, so you get increased puncture protection as well as superior traction and handling.

The GP Attack benefits from its special version of Continental's Black Chili Compound that gives the streamlined 23mm front tire more grip with lower rolling resistance. The optimum front tire gets you quickly into the turns, feeling light and responsive while providing ample life. The GP Force is a powerful rear tire and with its 25mm section combined with a fast Black Chili Compound, it gives excellent traction and road handling that’s second to none. Both tires are made with Vectran puncture protection and show wear and tear levels via indicators in the tread, details that show professionals are at work. *Includes both Attack (front) and Force (rear) tires.

Fat tire optimized for snowy conditions. The Maxxis Colossus is a fat tire designed for use in winter conditions. The tread consists of numerous tall knobs designed to penetrate snow and grip the hard terrain underneath. The open tread pattern clears out packed snow to maintain traction, and a special rubber compound stays pliable in freezing conditions. - Snow-specific tread pattern - Tubeless Ready - Dual compound

Minion performance comes to fat bikes. The Maxxis Minion FBF represents a progression in fat-biking by offering a front-specific tire designed for trail riding. Featuring the proven Minion DHF tread blocks, the FBF combines extreme cornering capability, low rolling resistance, and fat-tire volume for unsurpassed grip on uneven and loose surfaces. - Inspired by the Minion DHF - Front-specific tread design - Dual compound - EXO Protection - Tubeless Ready

Minion performance comes to fat bikes. The Minion FBR is a rear-specific fat bike tire designed for trail riding. It shares the look of the Minion DHR II, but is optimized for fat biking. The Minion FBR features well-known, proven side knobs for cornering traction and ramped, paddle-like knobs down the middle, minimizing rolling resistance and maximizing traction in all conditions. - Inspired by the Minion DHR II - Rear-specific tread design - EXO Protection - Tubeless Ready

Continental's Attack Comp is designed for use as a front tire. It's hand made in Germany and features their Black Chili rubber compound for excellent performance, their Vectran Breaker puncture protection, and a supple 3-ply, 110 thread-per-inch casing for sweet compliance to smooth every ride. It also boasts Conti's TirePositioningSystem (TPS) to maximize its aerodynamics and cornering.

The fastest riders in the world place their trust in these handmade German tubulars. The Competition is a world-class tire proven everywhere from the cobbles of Paris-Roubaix to the local crit. The 180-thread-per-inch 3-ply casing offers a velvety-smooth ride and the Vectran sub-tread provides exceptional puncture protection, reduced rolling resistance and a great road feel.

Many of the fastest riders in the world place their trust in these handmade German tubulars. The Competition is a world-class tire proven everywhere from the cobbles of Paris-Roubaix to your local crit series. The 180-thread-per-inch, 3-ply casing offers a velvety-smooth ride and the Vectran sub-tread provides exceptional puncture protection, reduced rolling resistance and a great road feel.

Continental's Force Comp is designed for use as a rear tire. It's hand made in Germany and features their Black Chili rubber compound for outstanding performance, their Vectran Breaker puncture protection and a 3-ply, 180 thread-per-inch casing for excellent power transmission to the ground. It also boasts Conti's TirePositioningSystem (TPS) to maximize its aerodynamics and cornering.

Tubular all-round tire for all indoor track disciplines. - 320 TPI Corespun casing - Graphene-enhanced compound for speed, grip, and durability - Modern, asymmetric tread design for the best speed and grip in the riding direction

45NRTH's Nicotine is the first high performance mountain bike tire offering concave studs (sold separately). The high volume 2.35-inch casing profile adds float on packed snow while also adding a flatter contact patch for incredible traction and stability. The tread design of the Nicotine uses siping and open space between lugs to grip and shed snow. Add up to 222 lightweight studs with a concave carbide tip and aluminum base to provide extra assurance when the surface turns icy.

The fat bike tire. Extremely light. The large volume can be ridden with extremely low air pressure. Ideal on deep soil, rough and very loose terrain. - SnakeSkin option: The monofile SnakeSkin fabric on the side wall makes the tubeless conversion for the MTB extremely easy and safe. It also provides the best cut protection on the side wall. - LiteSkin option: The lightest option. LiteSkin MTB tires forego SnakeSkin, but still have high pressure resistant tire beads. If you don't mind the extra effort, these tires can also be converted to Tubeless by using a liquid sealant. - Addix Speedgrip: The universal compound. It definitely has the widest range of use. Perfect for XC, AM and Trail: for the majority of EVO tires there’s a version with ADDIX Speedgrip! It replaces the previous PaceStar compound where a significant, though not the only difference, during extensive use is more mileage and a longer life. - Folding Bead

Surly's Bud Tire is front-specific and a massive 4.8-inches wide, giving you incredible traction and control. Put it on a 100mm-wide rim and let its aggressive tread carry you over snow and mud. A Kevlar bead and supple sidewalls help keep the weight down and provide a smooth ride.

Surly's Knard tire exists in a strange realm trail-taming of fatty wideness. The tread consists of closely spaced blocks that grab terrain and hold it hostage until they're done with it. Run low pressure for mind-blowing traction or pump it up for lower rolling resistance, either way the Knard has the grip to make Spiderman jealous.

Surly's Lou Tire is rear-specific and a massive 4.8-inches wide, giving you incredible traction and control. Put it on a 100mm-wide rim and let its aggressive tread carry you over snow and mud. A Kevlar bead and supple sidewalls help keep the weight down and provide a smooth ride.

Minion performance comes to fat bikes. The Maxxis Minion FBF represents a progression in fat-biking by offering a front-specific tire designed for trail riding. Featuring the proven Minion DHF tread blocks, the FBF combines extreme cornering capability, low rolling resistance, and fat-tire volume for unsurpassed grip on uneven and loose surfaces. - Inspired by the Minion DHF - Front-specific tread design - Dual compound - EXO Protection - Tubeless Ready

Minion performance comes to fat bikes. The Minion FBR is a rear-specific fat bike tire designed for trail riding. It shares the look of the Minion DHR II, but is optimized for fat biking. The Minion FBR features well-known, proven side knobs for cornering traction and ramped, paddle-like knobs down the middle, minimizing rolling resistance and maximizing traction in all conditions. - Inspired by the Minion DHR II - Rear-specific tread design - EXO Protection - Tubeless Ready